line_overlap library

Finds shared (overlapping) segments between two linear or polygon GeoJSON geometries.

Classes

BBox
Please make sure, you arrange your parameters like this: Longitude 1, Latitude 1, Altitude 1 (optional), Longitude 2, Latitude 2, Altitude 2 (optional) You can either specify 4 or 6 parameters If you are using the default constructor with two dimensional positions (lng + lat only), please use the constructor like this: BBox(lng1, lat1, lng2, lat2);
CoordinateType
Coordinate types, following https://tools.ietf.org/html/rfc7946#section-4
Feature<T extends GeometryObject>
Feature, as specified here https://tools.ietf.org/html/rfc7946#section-3.2
FeatureCollection<T extends GeometryObject>
FeatureCollection, as specified here https://tools.ietf.org/html/rfc7946#section-3.3
GeoJSONObject
GeometryCollection
GeometryCollection, as specified here https://tools.ietf.org/html/rfc7946#section-3.1.8
GeometryObject
GeometryType<T>
LineString
LineString, as specified here https://tools.ietf.org/html/rfc7946#section-3.1.4
MultiLineString
MultiLineString, as specified here https://tools.ietf.org/html/rfc7946#section-3.1.5
MultiPoint
MultiPoint, as specified here https://tools.ietf.org/html/rfc7946#section-3.1.3
MultiPolygon
MultiPolygon, as specified here https://tools.ietf.org/html/rfc7946#section-3.1.7
Point
Point, as specified here https://tools.ietf.org/html/rfc7946#section-3.1.2
Polygon
Polygon, as specified here https://tools.ietf.org/html/rfc7946#section-3.1.6
Position
Please make sure, you arrange your parameters like this:

Functions

lineOverlap(Feature<GeometryObject> feature1, Feature<GeometryObject> feature2, {num tolerance = 0, Unit unit = Unit.kilometers}) → FeatureCollection<LineString>
Takes any LineString, MultiLineString, Polygon or MultiPolygon and returns the overlapping lines between both features. feature1 first feature feature2 second feature tolerance tolerance distance to match overlapping line segments, default is 0 unit the unit in which the tolerance is expressed, default is kilometers returns FeatureCollection<LineString> lines(s) that are overlapping between both features